LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> GX 470 >> Repair and Diagnosis >> Engine Mechanical >> Auxiliary Emission Control Systems >> Emission Control >> Canister >> Installation

Emission Control: Canister: Installation

  1. INSTALL CHARCOAL CANISTER ASSEMBLY 
    1. Install the charcoal canister with the 3 bolts.

      Torque: 20 N*m (204 kgf*cm, 15 ft.*lbf) 

    2. Connect the purge line hose to the charcoal canister.
    3. Connect the connector to the pump module.
    4. Connect the canister outlet hose No. 2 to the charcoal canister.
    5. Connect the fuel tank hose to the charcoal canister.
  2. INSTALL CHARCOAL CANISTER FILTER SUB-ASSEMBLY 
    1. Install the charcoal canister with a bolt.

      Torque: 20 N*m (204 kgf*cm, 15 ft.*lbf) 

    2. Connect the canister outlet hose to the fuel tank filler pipe.
    3. Connect the canister outlet hose No. 2 to the charcoal canister.
  3. INSTALL SPARE TIRE 
    Fig 1: Locating Charcoal Canister Bolt
    G04962730Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals