Front Door Window Frame Moulding: Removal

HINT:

On the RH side, use the same procedures as on the LH side.

1. REMOVE FRONT DOOR WINDOW FRAME MOULDING REAR LH 
   1. Remove the screw.
   2. Using a heat light, heat the moulding between 40 and 60°C (104 and 140°F).
      NOTE: Do not heat the moulding excessively.
   3. Slide the moulding upward to remove the moulding.
      NOTE: If reusing the moulding, take care not to damage the moulding.
   Fig 1: Sliding Moulding Upward To Removing Moulding

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002