Seat Belt Control Ecu: Installation

INSTALL SEAT BELT CONTROL ECU
1. Attach the claw of the ECU's stay to install the ECU to the junction block.
2. Install the nut.
3. Connect the ECU connector.
  
  Fig 1: Identifying Seat Belt Control ECU
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Install the ECU with the 3 nuts.
  
  Fig 2: Identifying ECU Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL LUGGAGE COMPARTMENT TRIM SIDE COVER INNER LH (See INSTALLATION )
INSTALL LUGGAGE COMPARTMENT TRIM COVER FRONT (See INSTALLATION )
INSTALL REAR FLOOR FINISH PLATE (See INSTALLATION )
INSTALL TOOL BOX
INSTALL LUGGAGE COMPARTMENT FLOOR MAT
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
CHECK SRS WARNING LIGHT
1. Check the SRS warning light (see DIAGNOSIS SYSTEM (2006/02-2006/07) ).
PERFORM INITIALIZATION
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
1. Perform initialization (see INITIALIZATION (2006/02-2006/07) ).