LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> GS 450h >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Pre-Collision >> Pre-Collision System >> DTC Check / Clear

DTC Check / Clear

  1. CHECK DTC 
    1. Connect the intelligent tester (with CAN VIM) to the DLC3.
      Fig 1: Connecting Intelligent Tester To DLC3
      G05285048Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Turn the power switch ON (IG).
    3. Read the DTCs by following the directions on the tester's screen.

      HINT:

      • When using the intelligent tester with the power switch OFF to troubleshoot: Connect the intelligent tester to the vehicle, and turn a courtesy light switch on and off at 1.5 second intervals until communication between the tester and vehicle begins.
      • Refer to the intelligent tester operator's manual for further details.
  2. CLEAR DTC 
    1. Connect the intelligent tester (with CAN VIM) to the DLC3.
    2. Turn the power switch ON (IG).
    3. Erase the DTCs by following the directions on the tester's screen.

      HINT:

      • When using the intelligent tester with the power switch OFF to troubleshoot: Connect the intelligent tester to the vehicle, and turn a courtesy light switch on and off at 1.5 second intervals until communication between the tester and vehicle begins.
      • Refer to the intelligent tester operator's manual for further details.
scientia non olet · About LEMON Manuals