Air Conditioning: Condenser: Reassembly

INSTALL COOLER DRYER
1. Using pliers, install the cooler dryer.
  
  Fig 1: Identifying Cooler Dryer
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Apply a sufficient amount of compressor oil to the contact surfaces of a new O-ring and the cap.
  Compressor oil:
  
  ND-OIL 11 or equivalent
3. Install the O-ring to the cap.
  
  Fig 2: Locating O-Ring On Cap
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Using a 14 mm socket hexagon wrench, install the cap to the modulator.
  Torque: 2.9 N*m (30 kgf*cm, 26 in.*lbf)
  
  Fig 3: Identifying Cap To Modulator
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002