Rear Console Box: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
REMOVE FRONT CONSOLE UPPER PANEL GARNISH
1. Using a screwdriver, detach the claws and remove the garnish.
  HINT:
  
  Tape the screwdriver tip before use.
REMOVE CONSOLE UPPER PANEL ASSEMBLY
1. Twist the shift lever knob in the direction indicated by the arrow and remove it.
  
  Fig 1: Twisting Shift Lever Knob
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using a screwdriver, detach the 9 clips.
  HINT:
  
  Tape the screwdriver tip before use.
3. Remove the console upper panel and then disconnect the connector.
  
  Fig 2: Identifying Console Upper Panel Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE INSTRUMENT PANEL FINISH PANEL END RH
1. Remove the screw.
2. Using a screwdriver, detach the 3 clips and 3 claws.
  HINT:
  
  Tape the screwdriver tip before use.
3. Remove the finish panel end.
  
  Fig 3: Identifying Instrument Panel Finish Panel End Clips And Claws - RH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE INSTRUMENT PANEL FINISH PANEL END LH
1. Remove the screw.
2. Using a screwdriver, detach the 4 clips and 3 claws.
  HINT:
  
  Tape the screwdriver tip before use.
3. Remove the finish panel end.
  
  Fig 4: Identifying Instrument Panel Finish Panel End Clips And Claws - LH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE CONSOLE BOX PLATE
1. Using a screwdriver, detach the 4 clips.
  HINT:
  
  Tape the screwdriver tip before use.
2. Remove the console box plate and then disconnect the connector.
  
  Fig 5: Identifying Console Box Plate Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE CONSOLE BOX REGISTER ASSEMBLY
1. Using a screwdriver, detach the 4 clips and remove the register.
  HINT:
  
  Tape the screwdriver tip before use.
  
  Fig 6: Identifying Console Box Register Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE CONSOLE BOX
1. Remove the 4 bolts and 2 screws.
2. Remove the console box and then disconnect the connector.
  
  Fig 7: Identifying Console Box Bolts And Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002