LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> GS 430 >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Engine Control System (2GR-FSE) - SFI System Introduction, Precautions, Troubleshooting, Symptoms Table, Terminals Of ECM, Diagnostic Trouble Code Chart) >> SFI System >> Check For Intermittent Problems

Check For Intermittent Problems

WARNING: This page is about a different car, the 2007 Lexus GS 350. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

Inspect the vehicle's ECM using check mode. Intermittent problems are easier to detect with the intelligent tester when the ECM is in check mode. In check mode, the ECM uses 1 trip detection logic, which is more sensitive to malfunctions than normal mode (default), which uses 2 trip detection logic.

  1. Clear the DTCs (see DTC CHECK / CLEAR ).
  2. Switch the ECM from normal mode to check mode using the intelligent tester (see CHECK MODE PROCEDURE ).
  3. Perform a simulation test.
  4. Check and wiggle the harness(es), connector(s) and terminal(s).
scientia non olet · About LEMON Manuals