Charging (3UZ-FE): Generator: Replacement

REPLACE FRONT BEARING
1. Remove the 4 screws and retainer plate.
  
  Fig 1: Locating Screws And Retainer Plate
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using SST and a press, press out the front bearing.
  SST 09950-60010 (09951-00250), 09950-70010 (09951-07100)
  
  Fig 2: Taping Out Bearing
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Using SST and a press, press in a new front bearing.
  SST 09950-60010 (09951-00250), 09950-70010 (09951-07100)
  
  Fig 3: Pressing In Bearing
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Install the retainer plate with the 4 screws.
  Torque: 2.3 N*m (24 kgf*cm, 20 in.*lbf)
Fig 4: Locating Screws And Retainer Plate
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002