Front Power Seat Lumbar Switch: Removal

HINT:

Use the same procedures for the LH and RH side.

DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY
1. Using a screwdriver, detach the 2 claws and remove the front seat belt cover.
  HINT:
  
  Tape the screwdriver tip before use.
  
  Fig 1: Removing Front Seat Belt Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Apply protective tape around the seat belt anchor cover cap to the cushion shield.
3. Using a screwdriver, detach the 2 claws and remove the seat belt anchor cover cap.
  HINT:
  
  Tape the screwdriver tip before use.
4. Move the seat using the power seat switch knob so that the belt anchor bolt is revealed.
  
  Fig 2: Removing Seat Belt Anchor Cover Cap
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Remove the bolt and front seat outer belt anchor.
Fig 3: Installing Front Seat Outer Belt Assembly
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE RECLINING POWER SEAT SWITCH KNOB
1. Using a screwdriver, detach the knob.
  HINT:
  
  Tape the screwdriver tip before use.
Fig 4: Removing Reclining Power Seat Switch Knob
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB
1. Using a screwdriver, detach the knob.
  HINT:
  
  Tape the screwdriver tip before use.
REMOVE FRONT SEAT CUSHION SHIELD ASSEMBLY
1. Disconnect the 2 rubber bands of the front seatback board from the front seat frame with adjuster.
  
  Fig 5: Removing Front Seat Cushion Shield Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 5 screws.
3. Detach the claw and remove the cushion shield assembly in the order indicated in the illustration.
4. Disconnect the connector from the lumbar front power seat switch.
  
  Fig 6: Disconnecting Connector From Lumbar Front Power Seat Switch
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT POWER SEAT LUMBAR SWITCH
1. Remove the 2 screws and switch.