Outer Mirror Switch: Removal
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
- REMOVE FRONT CONSOLE UPPER PANEL GARNISH (See REMOVAL )
- REMOVE CONSOLE UPPER PANEL ASSEMBLY (See REMOVAL )
- REMOVE INSTRUMENT PANEL FINISH PANEL END LH (See REMOVAL )
- REMOVE FRONT DOOR SCUFF PLATE LH (See REMOVAL )
- REMOVE FRONT DOOR OPENING TRIM COVER LH (See REMOVAL )
- REMOVE INSTRUMENT SIDE PANEL LH (See REMOVAL )
- REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY (See REMOVAL )
- REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (See REMOVAL )
- REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY
- Remove the 2 screws.
- Using a screwdriver, detach the 2 claws.
HINT:
Tape the screwdriver tip before use.
- Remove the control panel and then disconnect the connector.