Inspection Procedure

1. Connect the intelligent tester to the DLC3.
2. Turn the engine switch to the on (IG) position and turn the intelligent tester main switch ON.
3. Select the items below in the Data List, and read the displays on the intelligent tester.

   Integration control and panel assembly 

   DATA LIST - INTEGRATION CONTROL AND PANEL ASSEMBLY
   
   

   Item	Measurement Item / Display (Range)	Normal Condition	Diagnostic Note
   AFS OFF SW	AFS OFF switch / ON or OFF	ON: AFS switch ON OFF: AFS switch OFF	-

NG: REPLACE INTEGRATION CONTROL AND PANEL ASSEMBLY 

OK: Go to next step 

1. Connect the intelligent tester to the DLC3.
2. Turn the engine switch to the on (IG) position and turn the intelligent tester main switch ON.
3. Select the items below in the Data List, and read the displays on the intelligent tester.

AFS ECU 

NG: REPLACE PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE 

OK: REPLACE COMBINATION METER ASSEMBLY