License Plate Light Assembly: Installation

HINT:

• Use the same procedures for the RH side and LH side.
• The procedures listed below are for the LH side.

Fig 1: Identifying Luggage Compartment Door Clips And Retainer

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. INSTALL BACK DOOR GARNISH RETAINER SUB-ASSEMBLY 
   1. Install the 2 clips and retainer to the luggage compartment door.
   2. Install the 2 screws.
   Fig 2: Identifying Luggage Compartment Door Clips And Retainer

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. INSTALL LICENSE PLATE LIGHT ASSEMBLY 
   1. Install the license plate light and 2 screws to the luggage compartment door.
      Fig 3: Identifying License Plate Light Screws

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Connect the connector.
      Fig 4: Connecting Connector

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. INSTALL LUGGAGE COMPARTMENT DOOR GARNISH SUB-ASSEMBLY OUTSIDE (See  INSTALLATION  ) 
4. INSTALL LUGGAGE DOOR OPENING SWITCH ASSEMBLY 
   1. Install the switch and 2 screws to luggage compartment door.
      Fig 5: Locating Luggage Compartment Door Screws

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Connect the connector.
5. INSTALL LUGGAGE COMPARTMENT DOOR COVER (See  INSTALLATION  ) 
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
7. PERFORM INITIALIZATION 
   1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.