High Mounted Stop Light Assembly: Installation

INSTALL AUTOMATIC LIGHT CONTROL SENSOR
1. Connect the connector.
2. Attach the 2 claws and install the sensor to the package tray trim center bracket.
Fig 1: Identifying Automatic Light Control Sensor Claws And Connector
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL HIGH MOUNTED STOP LIGHT ASSEMBLY
1. Connect the connector.
2. Attach the 2 claws and install the stop light to the package tray trim center bracket.
  
  Fig 2: Identifying High Mounted Stop Light Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CONNECT BATTERY NEGATIVE TERMINAL
PERFORM INITIALIZATION
1. Perform initialization (see INITIALIZATION ).
  NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal