LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> GS 430 >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Audio/Visual >> Network Gateway Ecu >> Removal

Network Gateway Ecu: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE FRONT CONSOLE UPPER PANEL GARNISH (See  REMOVAL  ) 
  3. REMOVE CONSOLE UPPER PANEL ASSEMBLY (See  REMOVAL  ) 
  4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH (See  REMOVAL  ) 
  5. REMOVE FRONT DOOR SCUFF PLATE RH (See  REMOVAL  ) 
  6. REMOVE FRONT DOOR OPENING TRIM COVER RH (See  REMOVAL  ) 
  7. REMOVE INSTRUMENT SIDE PANEL RH (See  REMOVAL  ) 
  8. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (See  REMOVAL  ) 
  9. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY (See  INSTALLATION  ) 
  10. REMOVE GLOVE COMPARTMENT DOOR SUB-ASSEMBLY (See  REMOVAL  ) 
  11. REMOVE NETWORK GATEWAY ECU 
    1. Disconnect the connector.
    2. Detach the 2 claws and remove the cover.
    3. Remove the ECU.
    Fig 1: Identifying Network Gateway ECU Cover Claws
    G05299628Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals