LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> GS 350 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Automatic Transaxle) >> Floor Shift Assembly >> Inspection

Floor Shift Assembly: Inspection

WARNING: This page is about a different car, the 2007 Lexus GS 430. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT TRANSMISSION CONTROL SWITCH 
    1. Connect the park/neutral position switch connector.

      Standard resistance 

      RESISTANCE SPECIFICATION

      Shift Position Tester Connection Specified Condition
      S, "+" and "-" 3 - 7 Below 1 Ω
      Except S, "+" and "-" ↑ 10 kΩ or higher
    2. Disconnect the transmission control switch connector of shift lock control unit assembly.
    3. Measure resistance according to the value (s) in the table below when the shift lever is moved to each position.
    Fig 1: Identifying Transmission Control Switch Connector
    G05295409Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals