LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> GS 350 AWD >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition (2GR-FSE) >> Ignition Coil >> Removal

Ignition Coil: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE COOL AIR INTAKE DUCT SEAL (See  REMOVAL  ) 
  3. REMOVE ENGINE ROOM SIDE COVER LH (See  REMOVAL  ) 
  4. REMOVE ENGINE ROOM SIDE COVER RH (See  REMOVAL  ) 
  5. REMOVE V-BANK COVER (See  REMOVAL  ) 
  6. DISCONNECT NO. 2 VENTILATION HOSE (See  REMOVAL  ) 
  7. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE (See  REMOVAL  ) 
  8. REMOVE IGNITION COIL ASSEMBLY 
    1. Detach the 3 wire harness clamps and disconnect the noise filter connector.
      Fig 1: Locating Wire Harness Clamps And Filter Connector
      G05287690Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the 6 ignition coil connectors.
    3. Remove the 6 bolts and the 6 ignition coils.
    Fig 2: Locating Ignition Coils With Bolts
    G05287691Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals