VACUUM SWITCHING VALVE (for EVAP): Installation

INSTALL NO. 1 VACUUM SWITCHING VALVE
1. Install the No. 1 vacuum switching valve with the bolt.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  
  Fig 1: Identifying No. 1 Vacuum Switching Valve With Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Disconnect the 2 vacuum hoses and No. 1 vacuum switching valve connector.
INSTALL V-BANK COVER SUB-ASSEMBLY (See INSTALLATION )

Fig 2: Locating Vacuum Hoses And No. 1 Vacuum Switching Valve Connector
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002