Emission Control: Canister: Installation

INSTALL CHARCOAL CANISTER ASSEMBLY
1. Install the 2 bolts, clip and charcoal canister.
  Torque: 39 N*m (398 kgf*cm, 29 ft.*lbf)
2. Connect the purge line hose to the charcoal canister.
3. Connect the wire harness clamp.
4. Connect the vapor pressure sensor connector.
  
  Fig 1: Locating Vapor Pressure Sensor Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Connect the charcoal canister filter sub-assembly to the charcoal canister.
  
  Fig 2: Locating Charcoal Canister Filter Sub-Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
6. Connect the fuel tank vent hose to the charcoal canister.
INSTALL FUEL TANK ASSEMBLY
HINT:

(See INSTALLATION )

Fig 3: Locating Fuel Tank Vent Hose
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002