Low Pitched Horn: Installation

INSTALL LOW PITCHED HORN ASSEMBLY
1. Install the low pitched horn assembly with the bolt.
  Torque: 20 N*m (204 kgf*cm, 15 ft.*lbf)
2. Connect the connector.
INSTALL FRONT BUMPER ASSEMBLY (See INSTALLATION )
INSTALL COOL AIR INTAKE DUCT SEAL (See INSTALLATION )

Fig 1: Locating Low Pitched Horn Assembly Bolt
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
VEHICLE PREPARATION FOR FOG LIGHT AIM ADJUSTMENT (See REMOVAL )
PREPARATION FOR FOG LIGHT AIMING (See ADJUSTMENT )
FOG LIGHT AIMING INSPECTION (See ADJUSTMENT )
FOG LIGHT AIMING ADJUSTMENT (See REASSEMBLY )