LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> ES 350 >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat >> Power Seat Switch >> Installation

Power Seat Switch: Installation

  1. INSTALL FRONT POWER SEAT SWITCH (w/ Seat Position Memory System) 
    1. Install the power seat switch with the 3 screws.
    2. Connect the 2 connectors.
    Fig 1: Identifying Screws And Power Seat Switch
    G05253976Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL FRONT POWER SEAT SWITCH (w/o Seat Position Memory System) 
    1. Install the power seat switch with the 3 screws.
    2. Connect the connector.
  3. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY (See  INSTALLATION   ) 
  4. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB (See  INSTALLATION   ) 
  5. INSTALL RECLINING POWER SEAT SWITCH KNOB (See  INSTALLATION   ) 
  6. INSTALL FRONT SEAT ASSEMBLY (See  INSTALLATION   ) 
  7. INSTALL FRONT SEAT REAR OUTER TRACK BRACKET COVER (See  INSTALLATION   ) 
  8. INSTALL FRONT SEAT REAR INNER TRACK BRACKET COVER (See  INSTALLATION   ) 
  9. INSTALL FRONT SEAT OUTER TRACK BRACKET COVER (See  INSTALLATION   ) 
  10. INSTALL FRONT SEAT INNER TRACK BRACKET COVER (See  INSTALLATION   ) 
  11. INSTALL FRONT SEAT HEADREST ASSEMBLY 
  12. CONNECT FRONT SEAT OUTER BELT ASSEMBLY  (See INSTALLATION )
  13. INSTALL SEAT BELT ANCHOR COVER CAP  (See INSTALLATION )
  14. PERFORM INITIALIZATION 
    NOTE: Some systems need initialization after reconnecting the negative battery cable (See INITIALIZATION )
  15. INSPECT FRONT SEAT ASSEMBLY (See  INSTALLATION   ) 
  16. INSPECT SRS WARNING LIGHT 

    Check the SRS warning light. (See DIAGNOSIS SYSTEM )

scientia non olet · About LEMON Manuals