Lumbar Support Adjuster Assembly: Installation

INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY
1. Install the lumber support adjuster assembly with the 2 screws.
2. Connect the connector.
Fig 1: Identifying Screws And Lumbar Support Adjuster Assembly
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT SEPARATE TYPE SEATBACK COVER WITH PAD (See INSTALLATION )
INSTALL FRONT SEAT HEADREST SUPPORT (See INSTALLATION )
INSTALL FRONT SEAT HEADREST SUPPORT
INSTALL FRONT SEATBACK BOARD COVER SUB-ASSEMBLY (See INSTALLATION )
INSTALL FRONT SEATBACK BOARD SUB-ASSEMBLY (See INSTALLATION )
INSTALL FRONT SEAT INNER CUSHION SHIELD (See INSTALLATION )
INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY (See INSTALLATION )
INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB (See INSTALLATION )
INSTALL RECLINING POWER SEAT SWITCH KNOB (See INSTALLATION )
INSTALL FRONT SEAT INNER BELT ASSEMBLY (See INSTALLATION )
INSTALL FRONT SEAT ASSEMBLY (See INSTALLATION )
INSTALL FRONT SEAT REAR OUTER TRACK BRACKET COVER (See INSTALLATION )
INSTALL FRONT SEAT REAR INNER TRACK BRACKET COVER (See INSTALLATION )
INSTALL FRONT SEAT OUTER TRACK BRACKET COVER (See INSTALLATION )
INSTALL FRONT SEAT INNER TRACK BRACKET COVER (See INSTALLATION )
INSTALL FRONT SEAT HEADREST ASSEMBLY
CONNECT FRONT SEAT OUTER BELT ASSEMBLY (See INSTALLATION )
INSTALL SEAT BELT ANCHOR COVER CAP (See INSTALLATION )
PERFORM INITIALIZATION
NOTE: Some systems need initialization after reconnecting the negative battery cable (See INITIALIZATION )
INSPECT FRONT SEAT ASSEMBLY (See INSTALLATION )
INSPECT SRS WARNING LIGHT
Check the SRS warning light. (See DIAGNOSIS SYSTEM )