Rear Bumper: Installation

INSTALL REAR BUMPER ASSEMBLY (w/o Intuitive Parking Assist System)
1. Engage each claw.
2. Install the rear bumper assembly with the 2 clips, 4 screws and 2 bolts.
  Torque: Bolt
  
  5.5 N*m (56 kgf*cm, 49 in.*lbf)
  
  Screw
  
  2.0 N*m (20 kgf*cm, 18 in.*lbf)
  
  Fig 1: Identifying Bumper Assembly Clips Screws With Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the 2 rear bumper plates.
  
  Fig 2: Locating Rear Bumper Plates
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR BUMPER ASSEMBLY (w/ Intuitive Parking Assist System)
1. Install the grommet.
2. Connect the connector.
  
  Fig 3: Locating Rear Bumper Assembly Connector And Grommet
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Engage each claw.
4. Install the rear bumper assembly with the 2 clips, 4 screws and 2 bolts.
  Torque: Bolt
  
  5.5 N*m (56 kgf*cm, 49 in.*lbf)
  
  Screw
  
  2.0 N*m (20 kgf*cm, 18 in.*lbf)
  
  Fig 4: Identifying Rear Bumper Assembly With Clips, Screws And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Install the 2 rear bumper plates.
INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER RH (w/ Intuitive Parking Assist System) (See REASSEMBLY )
INSTALL REAR FLOOR FINISH PLATE (w/ Intuitive Parking Assist System) (See REASSEMBLY )
INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (w/ Intuitive Parking Assist System) (See REASSEMBLY )
INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (w/ Intuitive Parking Assist System) (See REASSEMBLY )
INSTALL SPARE WHEEL COVER TRAY (w/ Intuitive Parking Assist System)
INSTALL LUGGAGE COMPARTMENT FLOOR MAT (w/ Intuitive Parking Assist System)