Front Bumper: Reassembly

1. Engage the 2 claws and install the front bumper stay LH.
2. Install the screw.

Fig 1: Identifying Front Bumper Stay LH Screw

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Install the front bumper reinforcement with the 6 bolts.

   Torque: 72 N*m (734 kgf*cm, 53 ft.*lbf) 

   Fig 2: Identifying Front Bumper Reinforcement Bolts

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the cooler bracket with the bolt.
3. Engage each clamp.
   Fig 3: Identifying Cooler Bracket Clamp

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Install the front bumper energy absorber to the front - bumper reinforcement.
   Fig 4: Identifying Front Bumper Energy Absorber

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Install the 4 No. 3 radiator grille garnishes.
   Fig 5: Identifying 4 No. 3 Radiator Grille Garnishes

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Engage the 2 claws and install the No. 2 radiator grille garnish.

   HINT:

   Use the same procedures for the RH side and LH side.

   Fig 6: Identifying No. 2 Radiator Grille Garnish Claws

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Engage the 2 claws and install the radiator grille garnish.

   HINT:

   Use the same procedures for the RH side and LH side.

   Fig 7: Identifying Radiator Grille Garnish Claws

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Engage the claw and install the fog light bracket LH.

Fig 8: Locating Fog Light Bracket LH Claws

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

HINT:

When installing the emblem, heat the radiator grille and emblem using a heat light.

Heating temperature 

1. Clean the radiator grille surface.
   1. Using a heat light, heat the radiator grille surface.
   2. Remove the double-sided tape from the radiator grille.
   3. Wipe off any tape adhesive residue with cleaner.
2. Clean the radiator grille emblem. (If reusing the radiator grille emblem)
   1. Using a heat light, heat the radiator grille emblem.
   2. Remove the double-sided tape from the radiator grille emblem.
   3. Wipe off any tape adhesive residue with cleaner.
   4. Apply new double-sided tape to the radiator grille emblem.
3. Install the radiator grille emblem.
   1. Using a heat light, heat the radiator grille and radiator grille emblem.
   2. Remove the release paper from the radiator grille emblem.

      HINT:

      After removing the release paper, keep the exposed adhesive free from foreign matter.

   3. Install the radiator grille emblem.
      Fig 9: Installing Radiator Grille Emblem

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Engage the claw and install the radiator grille emblem.
2. Install the 2 spring nuts.
   Fig 10: Identifying Radiator Grille Emblem Spring Nuts

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Engage each claw and install the radiator grille molding.
2. Install the 2 clips.
   Fig 11: Identifying Radiator Grille Molding Claws

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Engage each claw and install the radiator grille and radiator grille molding.
   Fig 12: Installing Radiator Grille

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the 2 screws and 2 clips.
   Fig 13: Identifying Radiator Grille Screws

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Engage the 17 clips and install the radiator grille seal.
   Fig 14: Identifying Radiator Grille Seal Clips

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Install the front bumper extension mounting bracket with the 2 screws.
   Fig 15: Identifying Front Bumper Extension Mounting Bracket Screws

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Engage the 2 claws and remove the front bumper hole cover.
   Fig 16: Identifying Front Bumper Hole Cover

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002