Customize Parameters
HINT:
The following items can be customized.
NOTE:
- After confirming whether the items requested by the customer are applicable or not for customization, perform customizing operations.
- Be sure to record the current settings before customization.
- When troubleshooting, make sure that the item in question is not set to "OFF" as a result of customization (Example: For the symptom, "the wireless function does not operate", first check that the wireless function is not set to "OFF", then perform troubleshooting).
- CUSTOMIZE
- Connect the intelligent tester (with CAN VIM) to the DLC3.
- Turn the engine switch on (IG).
- Enter the following menus: CUSTOMIZE / INDIVIDUAL CHANGE / SECURITY.
THEFT DETERRENT SYSTEM
THEFT DETERRENT SYSTEM REFERENCE CHARTDISPLAY (ITEM) DEFAULT CONTENTS SETTING PASSIVE MODE
(Passive Arming Mode)OFF PASSIVE MODE is a function that switches theft deterrent system from arming preparation state to armed state 30 seconds after key is not in the actuation area and all doors, engine hood and luggage compartment door are closed, even if doors are not locked by wireless or door key lock operation. In PASSIVE MODE, if you do not perform following operations within 14 seconds after door is opened during armed state, theft deterrent system will judge that condition as a theft and switch to alarm sounding state - Unlock any door by key or wireless operation
- Turn the engine switch on (IG)
- Open luggage compartment door by wireless operation
ON/OFF WARN BY HORN
(Warning by horn)ON Function that makes vehicle horn and theft deterrent horn able to be used as a warning device ON/OFF ENTRY DELAY
(Entry delay time)14 s Function that changes entry delay time (time before warning starts) for PASSIVE MODE 0 s/14 s/30 s