DTC Check / Clear

CHECK DTC
1. Connect the intelligent tester to the Controller Area Network Vehicle Interface Module (CAN VIM). Then connect the CAN VIM to the DLC3.
2. Turn the engine switch on (IG).
3. Read the DTCs by following the directions on the tester screen.
  HINT:
  
  Refer to the intelligent tester operator's manual for further details.
  
  Fig 1: Connecting Intelligent Tester To Controller Area Network Vehicle Interface Module (CAN VIM)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CLEAR DTC
1. Connect the intelligent tester (with CAN VIM) to the DLC3.
2. Turn the engine switch on (IG).
3. Erase the DTCs by following the directions on the tester's screen.
  HINT:
  
  Refer to the intelligent tester operator's manual for further details.
  
  Fig 2: Connecting Intelligent Tester (With CAN VIM) To DLC3
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002