LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2006 >> RX 400h AWD >> Repair and Diagnosis >> Brakes >> Brakes Control Systems >> Brake Control >> Brake Pedal Stroke Sensor >> Inspection

Brake Pedal Stroke Sensor: Inspection

  1. INSPECT BRAKE PEDAL STROKE SENSOR ASSEMBLY 
    1. Inspect the brake pedal stroke sensor assembly. If any of the following occurs, replace with a new brake pedal stroke sensor assembly:
      • The surface of the brake pedal stroke sensor assembly is cracked, dented, or chipped off.
      • The connector is scratched, cracked, or damaged.
      • The brake pedal stroke sensor assembly has been dropped.
    2. Measure the resistance according to the value(s) in the table below.

      Resistance 

      TESTER CONNECTION AND SPECIFIED CONDITION

      Tester Connection Specified Condition
      1 (BSR) - 2 (BCSS) 21.45 to 23.15 Ω
      Fig 1: Identifying Break Master Stroke Simulator Assembly Connector Terminal
      G04113359Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals