Brake Actuator: Reassembly

INSTALL BRAKE ACTUATOR ASSEMBLY
1. Install the 2 brake actuator bolt holders.
2. Install the brake actuator assembly to the actuator bracket with the 2 nuts.
  
  Fig 1: Installing Brake Actuator Bolt Holders
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
  
  NOTE: Do not remove the hole plug before connecting the brake tube because a new brake actuator assembly is filled with brake fluid.