Data List / Active Test
- DATA LIST
HINT:
Using the intelligent tester's DATA LIST allows the status of a switch, sensor, actuator and other items to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.
- Connect the intelligent tester (with CAN VIM) to the DLC3.
- Turn the ignition switch on.
- Read the DATA LIST.
D_SEAT (Position control ECU and switch assembly)
DATA LIST - D_SEAT (POSITION CONTROL ECU AND SWITCH ASSEMBLY)Item Measurement Item/Range (Display) Normal Condition Diagnostic Note RECLIN SW REAR Reclining switch signal (Rearward)/ ON or OFF ON: Reclining switch (Rearward) is ON
OFF: Reclining switch (Rearward) is OFF- RECLIN SW FRONT Reclining switch signal (Forward)/ ON or OFF ON: Reclining switch (Forward) is ON
OFF: Reclining switch (Forward) is OFF- F VTCL SW DOWN Front vertical switch signal (Downward)/ ON or OFF ON: Front vertical switch (Downward) is ON
OFF: Front vertical switch (Downward) is OFF- F VTCL SW UP Front vertical switch signal (Upward)/ ON or OFF ON: Front vertical switch (Upward) is ON
OFF: Front vertical switch (Upward) is OFF- LIFTER SW DOWN Lifter switch signal (Downward)/ ON or OFF ON: Lifter switch (Downward) is ON
OFF: Lifter switch (Downward) is OFF- LIFTER SW UP Lifter switch signal (Upward)/ ON or OFF ON: Lifter switch (Upward) is ON
OFF: Lifter switch (Upward) is OFF- SLIDE SW REAR Sliding switch signal (Rearward)/ ON or OFF ON: Sliding switch (Rearward) is ON
OFF: Sliding switch (Rearward) is OFF- SLIDE SW FRONT Sliding switch signal (Forward)/ ON or OFF ON: Sliding switch (Forward) is ON
OFF: Sliding switch (Forward) is OFF- POWER VOLTAGE Power supply for position control ECU and switch assembly/ MIN: 0 V, MAX: 19.89 V Within range from 11 to 14 V - IGSW Ignition switch position/ ON or OFF ON: Ignition switch is ON
OFF: Ignition switch is OFF- KEY UNLOCK SW Key unlock warning switch signal/ ON or OFF ON: Key is in ignition key cylinder
OFF: Key is not in ignition key cylinder- D-DOOR WARN SW Door courtesy light switch signal/ ON or OFF ON: Driver side door is open
OFF: Driver side door is closed- PNP SW Shift lever position P signal/ ON or OFF ON: Shift lever in P position
OFF: Shift lever in any position except P- M2 SW Seat memory M2 switch signal/ ON or OFF ON: Seat memory M2 switch is ON
OFF: Seat memory M2 switch is OFF- M1 SW Seat memory M1 switch signal/ ON or OFF ON: Seat memory M1 switch is ON
OFF: Seat memory M1 switch is OFF- SET SW Seat memory set switch signal/ ON or OFF ON: Seat memory set switch is ON
OFF: Seat memory set switch is OFF- SLIDE POS Seat sliding position/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 - RECLIN POS Seatback position/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 - F VTCL POS Seat front vertical position/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 - LIFTER POS Seat lifter position/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 - MEM M1 SW Driving position memorized with seat memory switch M1/ MEM or NOT MEM MEM: Memorized
NOT MEM: Not memorized- MEM M2 SW Driving position memorized with seat memory switch M2/ MEM or NOT MEM MEM: Memorized
NOT MEM: Not memorized- SEAT MEM M1 Seat position memorized with seat memory switch M1/ MEM or NOT MEM MEM: Memorized
NOT MEM: Not memorized- SEAT MEM M2 Seat position memorized with seat memory switch M2/ MEM or NOT MEM MEM: Memorized
NOT MEM: Not memorized- D-MIRR MEM 1 Driver side mirror position memorized with seat memory switch M1/ MEM or NOT MEM MEM: Memorized
NOT MEM: Not memorized- D-MIRR MEM 2 Driver side mirror position memorized with seat memory switch M2/ MEM or NOT MEM MEM: Memorized
NOT MEM: Not memorized- P-MIRR MEM 1 Front passenger side mirror position memorized with seat memory switch M1/ MEM or NOT MEM MEM: Memorized
NOT MEM: Not memorized- P-MIRR MEM 2 Front passenger side mirror position memorized with seat memory switch M2/ MEM or NOT MEM MEM: Memorized
NOT MEM: Not memorized- SLIDE MEM POS 1 Seat sliding position memorized with seat memory switch M1/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 - RECLN MEM POS 1 Seatback position memorized with seat memory switch M1/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 - F VTCL MEM POS 1 Front vertical position memorized with seat memory switch M1/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 - LIFTER MEM POS 1 Lifter position memorized with seat memory switch M1/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 - SLIDE MEM POS 2 Seat sliding position memorized with seat memory switch M2/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 - RECLN MEM POS 2 Seatback position memorized with seat memory switch M2/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 - F VTCL MEM POS 2 Front vertical position memorized with seat memory switch M2/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 - LIFTER MEM POS 2 Lifter position memorized with seat memory switch M2/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 - D-MIRR MEM POS 1 Driver side mirror position memorized with seat memory switch M1/ MIN: 0, MAX: 65535 Within range from 0 to 65535 - P-MIRR MEM POS 1 Front passenger side mirror position memorized with seat memory switch M1/ MIN: 0, MAX: 65535 Within range from 0 to 65535 - D-MIRR MEM POS 2 Driver side mirror position memorized with seat memory switch M2/ MIN: 0, MAX: 65535 Within range from 0 to 65535 - P-MIRR MEM POS 2 Front passenger side mirror position memorized with seat memory switch M2/ MIN: 0, MAX: 65535 Within range from 0 to 65535 -
- ACTIVE TEST
HINT:
Using the intelligent tester's ACTIVE TEST allows the relay, VSV, actuator, and other items to be operated without removing any parts. Reading the ACTIVE TEST early in troubleshooting is one way to save time. The DATA LIST can be displayed during the ACTIVE TEST.
- Connect the intelligent tester (with CAN VIM) to the DLC3.
- Turn the ignition switch on.
- Perform the ACTIVE TEST by following the directions on the tester screen.
D_SEAT (Position control ECU and switch assembly)
ACTIVE TEST - D_SEAT (POSITION CONTROL ECU AND SWITCH ASSEMBLY)Item Test Details Diagnostic Note RECLINING Test detail: reclining operation FRONT/REAR Vehicle condition: stopped - F VERTICAL Test detail: front vertical operation UP/DOWN Vehicle condition: stopped - LIFTER Test detail: lifter operation UP/DOWN Vehicle condition: stopped - SLIDE Test detail: sliding operation UP/DOWN Vehicle condition: stopped -