Data List / Active Test

HINT:

Using the intelligent tester's DATA LIST allows switch, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.

1. Connect the intelligent tester with CAN VIM to the DLC3.
2. Turn the ignition switch ON.
3. Read the DATA LIST.

   BODY (Body ECU): 

   DATA LIST REFERENCE CHART
   
   

   Item	Measurement Item / Display (Range)	Normal Condition	Diagnostic Note
   KEY UNLK WRN SW	Unlock warning switch signal /ON or OFF	ON: Key is in ignition key cylinder OFF: No key is in ignition key cylinder	-
   D DOR CTY SW	Driver side door courtesy switch signal /ON or OFF	ON: Driver side door is open OFF: Driver side door is closed	-

HINT:

Performing the intelligent tester's ACTIVE TEST allows relay, VSV, actuator, and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time. The DATA LIST can be displayed during the ACTIVE TEST.

1. Connect the intelligent tester with CAN VIM to the DLC3.
2. Turn the ignition switch ON.
3. Perform the ACTIVE TEST.

   METER: 

   ACTIVE TEST REFERENCE CHART
   
   

   Item	Test Details	Diagnostic Note
   KEY REMND BUZZR	Key reminder buzzer (OFF/ON)	Confirm that the vehicle is stopped, engine idling