DTC 01-D6 No Master: DTC 01-D7 Connection Check Error: Description
DTC DETECTION CONDITION AND TROUBLE AREA
| DTC No. |
DTC Detection Condition |
Trouble Area |
01-D6
*1 |
When either of the following conditions is met:
- The component which has stored the code has (had) been disconnected when the ignition switch is in the ACC or ON position
- The master device has (had) been disconnected when this code is stored
|
- Multi-display power source circuit
- Power source circuit of the component which has stored this code
- AVC-LAN circuit between the multi-display and the component which has stored this code
- Component which has stored this code
- Multi-display
|
01-D7
*2 |
When either of the following conditions is met:
- The component which has stored the code has (had) been disconnected after the engine starts (started)
- The master device has (had) been disconnected when this code is (was) stored
|
HINT:
- *1: Even if no failure is detected, a trouble code may be recorded depending on the battery condition or engine start voltage.
- *2: When 210 seconds have elapsed after disconnecting the power supply connector of the master component with the ignition switch in the ACC or ON position, this code is stored.
|