LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2006 >> RX 330 AWD >> Repair and Diagnosis >> Electrical >> Body Electrical >> Other Systems >> No. 2 Power Point Socket >> Installation

No. 2 Power Point Socket: Installation

  1. INSTALL NO. 2 POWER POINT SOCKET 
    1. Engage the 2 claws and install the No.2 power point socket.
    Fig 1: Installing No. 2 Power Point Socket
    G04093156Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL ROOF SIDE GARNISH ASSEMBLY INNER RH 
  3. INSTALL NO. 1 TONNEAU COVER HOLDER CAP 
  4. INSTALL NO. 2 ROOM LIGHT ASSEMBLY 
  5. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH 
  6. INSTALL ROPE HOOK 
  7. INSTALL REAR SEAT SIDE COVER RH 
  8. INSTALL REAR NO. 1 SEAT OUTER BELT ASSEMBLY RH 
    1. Install the rear No. 1 seat outer belt assembly RH with the bolt.

      Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

  9. INSTALL REAR FLOOR FINISH SIDE PLATE RH 
  10. INSTALL REAR FLOOR FINISH PLATE 
  11. INSTALL DECK SIDE TRIM COVER RH 
  12. INSTALL DECK SIDE TRIM BOX LH 
  13. INSTALL DECK SIDE TRIM BOX RH 
  14. INSTALL BACK DOOR WEATHERSTRIP 
  15. INSTALL NO.3 DECK BOARD SUB-ASSEMBLY 
  16. INSTALL NO.2 DECK BOARD SUB-ASSEMBLY 
  17. INSTALL DECK FLOOR BOX REAR 
  18. INSTALL DECK FLOOR BOX FRONT 
  19. INSTALL JACK CARRIER ASSEMBLY 
  20. INSTALL JACK ASSEMBLY 
  21. INSTALL JACK CARRIER SUPPORT 
  22. INSTALL TONNEAU COVER ASSEMBLY 
  23. INSTALL DECK BOARD SUB-ASSEMBLY 
  24. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH 
  25. INSTALL REAR DOOR SCUFF PLATE RH 
scientia non olet · About LEMON Manuals