No Image Appears on Multi-display
- CHECK DISPLAY SETTING
- Check that the display is not in "Screen OFF" mode.
OK: The display setting is not in "Screen OFF" mode.
NG: CHANGE SCREEN TO "SCREEN ON" MODE
OK: Go to next step.
- Check that the display is not in "Screen OFF" mode.
- CHECK IMAGE QUALITY SETTING
- Check that the screen color quality can be set.
OK: Setting is possible.
NG: Go to step 3
OK: PRESS PANEL SWITCH "DISPLAY" AND SET SCREEN COLOR QUALITY TO NORMAL
- Check that the screen color quality can be set.
- CHECK CABIN
- Check that condensation is not likely to occur in the cabin, and that the temperature is not high or extremely low in the cabin.
HINT:
- A humid cabin and a rapid change in temperature may lead to condensation. Condensation in the cabin may short circuit the screen.
- The appropriate cabin temperature is 20 to 30°C (68 to 86°).
OK: Condensation is not likely and temperature is not high or extremely low.
NG: SET CABIN TO APPROPRIATE TEMPERATURE
OK: RETURN TO THE ORIGINAL INSPECTION FLOW BECAUSE THE CHECK RESULT IS NORMAL
- Check that condensation is not likely to occur in the cabin, and that the temperature is not high or extremely low in the cabin.