LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2006 >> RX 330 AWD >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Navigation >> Navigation Ecu >> Installation

Navigation Ecu: Installation

  1. INSTALL NO. 2 DISC PLAYER BRACKET 
    1. Install the No.2 disc player bracket with the 2 screws.
    Fig 1: Installing No 2 Disc Player Bracket
    G04093073Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL DISC PLAYER BRACKET 
    1. Install the disc player bracket with the screw.
    Fig 2: Installing Disc Player Bracket
    G04093074Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL NAVIGATION ECU 
    1. Install the navigation ECU with the 3 bolts.
    2. Connect the 3 connectors and engage the clamp.
  4. INSTALL DECK SIDE TRIM LH BOX 
  5. INSTALL DECK SIDE TRIM RH BOX 
  6. INSTALL REAR FLOOR FINISH PLATE 
  7. INSTALL DECK NO. 3 BOARD SUB-ASSEMBLY 
  8. INSTALL DECK NO. 2 BOARD SUB-ASSEMBLY 
  9. INSTALL DECK FLOOR BOX REAR 
  10. INSTALL DECK FLOOR BOX FRONT 
  11. INSTALL JACK CARRIER ASSEMBLY 
  12. INSTALL JACK ASSEMBLY 
  13. INSTALL JACK CARRIER SUPPORT 
  14. INSTALL TONNEAU COVER ASSEMBLY 
  15. INSTALL DECK BOARD SUB-ASSEMBLY 
    Fig 3: Installing Navigation ECU
    G04093075Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  16. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  17. PERFORM INITIALIZATION 
    NOTE: Some systems need initialization when disconnecting the cable from negative battery terminal. (See PRECAUTION  )
scientia non olet · About LEMON Manuals