Park / Neutral Position Switch: Inspection

INSPECT PARK/NEUTRAL POSITION SWITCH

Disconnect the PNP switch connector.
Measure the resistance of the PNP switch when the shift lever is moved to each position.

Standard resistance

COMPONENT OPERATING RANGE CHART

Tester Connection	Shift Lever Position	Specified Condition
4 (B) - 5 (L)	P or N	Below 1 Ω
4 (B) - 5 (L)	Not on P or N	10 kΩ or higher
1 (RL) - 2 (RB)	R	Below 1 Ω
1 (RL) - 2 (RB)	Not on R	10 kΩ or higher
2 (RB) - 7 (DL)	D	Below 1 Ω
2 (RB) - 7 (DL)	Not on D	10 kΩ or higher
2 (RB) - 3 (2L)	2	Below 1 Ω
2 (RB) - 3 (2L)	Not on 2	10 kΩ or higher
2 (RB) - 8 (LL)	L	Below 1 Ω
2 (RB) - 8 (LL)	Not on L	10 kΩ or higher

Fig 1: Identifying PNP Switch Connector Terminals

G04062670

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002