LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2006 >> IS 250 AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (A760H) >> Transmission Control Switch >> Inspection

Transmission Control Switch: Inspection

  1. INSPECT TRANSMISSION CONTROL SWITCH 
    1. Connect the park/neutral position switch connector.
    2. Disconnect the transmission control switch connector of the shift lock control unit assembly.
    3. Measure the resistance according to the value(s) in TRANSMISSION CONTROL SWITCH  .

    Standard resistance 

    TRANSMISSION CONTROL SWITCH

    Shift Position Tester Connection Specified Condition
    S, "+" and "-" 3 - 7 Below 1 ohms
    Except S, "+" and "-" 3 - 7 10 k ohms or higher
    Fig 1: Inspecting Transmission Control Switch
    G04045299Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

    If the resistance value is not as specified, replace the transmission control switch.

scientia non olet · About LEMON Manuals