Section 80 (Cooling): Radiator: Installation

WARNING: This page is about a different car, the 2007 Lexus GX 470. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL RADIATOR ASSEMBLY
1. Insert the tabs of the radiator support through the radiator service holes.
2. Install the radiator assembly with the 4 bolts.
Torque: 18 N*m (184 kgf*cm, 13 ft.*lbf)

Fig 1: Locating Radiator Assembly Bolts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FAN SHROUD
1. Insert the tabs in the slots shown in the illustration, attach the fan shroud with the 2 bolts.
  Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf)
INSTALL RADIATOR RESERVE TANK ASSEMBLY
1. Install the reserve tank with the 3 bolts.
  Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf)
2. Connect the reserve tank hose to the radiator.
INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Fig 2: Locating Fan Shroud Bolts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
ADD ENGINE COOLANT (See COOLANT )
INSPECT ENGINE COOLANT LEAK (See COOLING SYSTEM )