Stop Light Switch: Inspection
WARNING: This page is about a different car, the 2006 Lexus GS 430 and 2006 Lexus GS 300. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT STOP LIGHT SWITCH ASSEMBLY
- Disconnect the switch.
- Measure the resistance of the switch.
Standard resistance
STANDARD RESISTANCE SPECIFICATION
| Tester Connection |
Switch Condition |
Specified Condition |
| 1 - 2 |
Pushed |
Below 1 Ω |
| 1 - 2 |
Not pushed |
10 kΩ or higher |
If the result is not as specified, replace the switch assembly.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002