LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2006 >> GX 470 >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Brake Control) >> Yaw Rate Sensor >> Removal

Yaw Rate Sensor: Removal

WARNING: This page is about a different car, the 2006 Lexus GS 430 and 2006 Lexus GS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE CONSOLE UPPER PANEL GARNISH FRONT (See  REMOVAL  ) 
  2. REMOVE FRONT CONSOLE UPPER PANEL ASSEMBLY (See  REMOVAL  ) 
  3. REMOVE CONSOLE BOX PLATE (See  REMOVAL  ) 
  4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH (See  REMOVAL  ) 
  5. REMOVE INSTRUMENT PANEL FINISH PANEL END LH (See  REMOVAL  ) 
  6. REMOVE CONSOLE BOX REGISTER ASSEMBLY (See  REMOVAL  ) 
  7. REMOVE CONSOLE BOX (See  REMOVAL  ) 
  8. REMOVE CONSOLE BOX NO.2 DUCT 
    1. Remove the 2 clips and the console box No.2 duct.
      Fig 1: Identifying Clips And Console Box No.2 Duct
      G04025246Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. REMOVE CONSOLE BOX NO.1 DUCT 
    1. Remove the clip and the console box duct No.1.
      Fig 2: Identifying Clip And Console Box Duct No.1
      G04025247Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  10. REMOVE YAW RATE SENSOR 
    1. Disconnect the yaw rate sensor connector.
    2. Separate the 2 wire harness clamps.
    3. Remove the 2 bolts and yaw rate sensor.
      NOTE: Do not remove the sensor from the bracket.
      Fig 3: Identifying Yaw Rate Sensor
      G04025248Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals