Steering Sensor: Removal
WARNING: This page is about a different car, the 2006 Lexus GS 430 and 2006 Lexus GS 300. However, it is still accessible from the selected car via links, so may be relevant.
- PRECAUTION
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
- REMOVE PLACE FRONT WHEELS FACING STRAIGHT AHEAD NOTE: When reconnecting the cable to the negative battery terminal after installing the steering sensor, check that the front tires and steering wheel are kept aligned straight ahead before and after connecting the cable to the negative battery terminal.
- REMOVE STEERING WHEEL COVER NO.2 LOWER (See REMOVAL )
- REMOVE STEERING WHEEL COVER NO.3 LOWER (See REMOVAL )
- REMOVE HORN BUTTON ASSEMBLY (See REMOVAL )
- REMOVE STEERING WHEEL ASSEMBLY
For 3GR-FSE (See REMOVAL )
For 3UZ-FE (See REMOVAL )
- REMOVE STEERING COLUMN COVER
For 3GR-FSE (See REMOVAL )
For 3UZ-FE (See REMOVAL )
- REMOVE SPIRAL CABLE SUB-ASSEMBLY WITH STEERING SENSOR (See REMOVAL )
- REMOVE STEERING SENSOR
- Disengage the claws and remove the steering sensor from the spiral cable sub-assembly with steering sensor.