LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2006 >> GX 470 >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Brake Control) >> Brake Control Power Supply >> Installation

Brake Control Power Supply: Installation

WARNING: This page is about a different car, the 2006 Lexus GS 430 and 2006 Lexus GS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL BRAKE CONTROL POWER SUPPLY ASSEMBLY 
    1. Install the 2 brackets with the 4 bolts.

      Torque: 13.5 N*m (138 kgf*cm, 10 ft.*lbf) 

      Fig 1: Identifying Brackets With Bolts
      G04026251Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the brake control power supply assembly with the 3 nuts.

      Torque: 17 N*m (173 kgf*cm, 13 ft.*lbf) 

    3. Connect the connector to the brake control power supply assembly.
  2. INSTALL LUGGAGE COMPARTMENT TRIM COVER SIDE RH 
    1. Install the luggage compartment trim cover side RH with the clip.
    2. Install the rope hook assembly.
  3. INSTALL LUGGAGE COMPARTMENT TRIM COVER FRONT 
    1. Install the luggage compartment trim cover front with the clip.
  4. INSTALL LUGGAGE COMPARTMENT TRIM NO.2 HOOK 
    1. Install the 2 luggage compartment trim No.2 hooks.
  5. INSTALL ROPE HOOK 
    1. Install the 2 rope hooks.
  6. INSTALL REAR FLOOR FINISH PLATE 
    1. Install the rear floor finish plate with the clip.
  7. INSTALL ROPE HOOK ASSEMBLY 
    1. Install the 2 rope hook assembly.
  8. INSTALL LUGGAGE COMPARTMENT TRIM NO.1 COVER 
    1. Install the luggage compartment trim No.1 cover
  9. INSTALL LUGGAGE COMPARTMENT FLOOR MAT 
    1. Install the luggage compartment floor mat.
  10. CONNECT BATTERY CABLE TO BATTERY NEGATIVE TERMINAL 
  11. CHECK AND CLEAR DTC 

    (See DIAGNOSIS SYSTEM  )

  12. PERFORM INITIALIZATION 

    (See INITIALIZATION )

    Some systems need initialization after reconnecting the cable to the negative battery terminal.

scientia non olet · About LEMON Manuals