Problem Symptoms Table
HINT:
- Use the table below to help determine the cause of the problem symptom. The potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
- Inspect the fuses and relays related to the system before inspecting the suspected areas below.
Push-button start
PROBLEM SYMPTOMS CHART
| Symptom | Suspected area |
|---|---|
| Power Source Mode does not Change | DTC B2271 Ignition Hold Monitor Malfunction |
| DTC B2272 Ignition 1 Monitor Malfunction | |
| DTC B2273 Ignition 2 Monitor Malfunction | |
| DTC B2274 ACC Monitor Malfunction | |
| DTC B2278 Engine Switch Circuit Malfunction | |
| Engine Switch Indicator Circuit | |
| ROOM OSCILLATOR DOES NOT RECOGNIZE KEY | |
| ENGINE SWITCH | |
| Immobilizer code ECU | |
| KEY LUGGAGE COMPARTMENT LOCK-IN PREVENTION FUNCTION DOES NOT OPERATE | |
| Power Source Control ECU | |
| DTC B2287 LIN Communication Master Malfunction; DTC B2289 Key Collation Waiting Time Over | |
| Engine does not Start | DTC for Push-button Start Function DIAGNOSIS SYSTEM |
| Power Source Mode does not Change | |
| ENGINE IMMOBILIZER SYSTEM | |
| ELECTRIC STEERING LOCK | |
| SFI SYSTEM | |
| ENGINE SWITCH | |
| Power Source Control ECU | |
| 1 |