LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2006 >> GS 300 RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Engine Control System (3UZ-FE)) >> Mass Air Flow Meter >> Removal

Mass Air Flow Meter: Removal

WARNING: This page is about a different car, the 2006 Lexus GS 430. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE COOL AIR INTAKE DUCT SEAL (  2  ) 
  3. REMOVE ENGINE ROOM SIDE COVER RH (  3  ) 
  4. REMOVE V-BANK COVER 
    1. Remove the 2 nuts and V-bank cover.
  5. REMOVE MASS AIR FLOW METER 
    1. Disconnect the MAF meter connector.
    2. Remove the 2 screws and MAF meter.
    3. Remove O-ring from the MAF meter.
      Fig 1: Identifying O-Ring From Maf Meter
      G04027181Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals