LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2006 >> GS 300 RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Automatic Transmission) >> Floor Shift Assembly >> Installation

Floor Shift Assembly: Installation

WARNING: This page is about a different car, the 2006 Lexus GS 430. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL FLOOR SHIFT ASSEMBLY 
    1. Install the floor shift assembly with the 4 bolts.

      Torque: 8.3 N*m (85 kgf*cm, 73 in.*lbf) 

    2. Connect the connector to the floor shift assembly.
      Fig 1: Identifying Floor Shift Assembly
      G04028473Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL FLOOR SHIFT GEAR SHIFTING ROD SUBASSEMBLY 
    1. Install the floor shift gear shifting rod sub-assembly with the nut.

      Torque: 13 N*m (130 kgf*cm, 9 ft.*lbf) 

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    Fig 2: Identifying Floor Shift Gear Shifting Rod Sub-Assembly
    G04028474Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. ADJUST SHIFT LEVER POSITION (See  INSPECTION   ) 
  5. INSPECT SHIFT LEVER POSITION (See  ON-VEHICLE INSPECTION   ) 
  6. INSTALL FRONT FLOOR HEAT INSULATOR NO.1 (See  INSTALLATION  ) 
  7. INSTALL FRONT EXHAUST PIPE ASSEMBLY 

    (INSTALLATION )

  8. INSTALL NO.2 CONSOLE BOX DUCT (See  INSTALLATION  ) 
  9. INSTALL CONSOLE BOX ( INSTALLATION  ) 
  10. INSTALL CONSOLE BOX REGISTER ASSEMBLY ( INSTALLATION  ) 
  11. REMOVE CONSOLE BOX PLATE ( INSTALLATION  ) 
  12. INSTALL INSTRUMENT PANEL FINISH PANEL END LH (See  INSTALLATION  ) 
  13. INSTALL INSTRUMENT PANEL FINISH PANEL END RH (See  INSTALLATION  ) 
  14. INSTALL CONSOLE UPPER PANEL ASSEMBLY (See  INSTALLATION  ) 
  15. INSTALL FRONT CONSOLE UPPER PANEL GARNISH (See  INSTALLATION  ) 
  16. PERFORM INITIALIZATION 

    (INITIALIZATION )

scientia non olet · About LEMON Manuals