LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2006 >> GS 300 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Engine Control System (3UZ-FE)) >> Knock Sensor >> Removal

Knock Sensor: Removal

WARNING: This page is about a different car, the 2006 Lexus GS 430. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCHARGE FUEL SYSTEM PRESSURE ( REMOVAL  ) 
  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  3. DRAIN ENGINE COOLANT ( ON-VEHICLE INSPECTION  ) 
  4. REMOVE INTAKE MANIFOLD ASSEMBLY 
    1. Remove the intake manifold (ON-VEHICLE INSPECTION ).
  5. REMOVE KNOCK SENSOR 
    1. Disconnect the 2 knock sensor connectors.
    2. Remove the 2 nuts and 2 knock sensors.
      Fig 1: Identifying Knock Sensors
      G04027227Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals