LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2006 >> GS 300 AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (3GR-FSE) - System And Circuit Testing, On-Vehicle Inspection, Removal, Inspection And Installation >> Crankshaft Position Sensor >> Inspection

Crankshaft Position Sensor: Inspection

  1. INSPECT CRANKSHAFT POSITION SENSOR 
    1. Measure the resistance between the terminals.

      Standard resistance 

      CRANKSHAFT POSITION SENSOR TERMINALS RESISTANCE SPECIFICATIONS

      Temperature Specified Condition
      Cold  1,630 to 2,740 Ω 
      Hot  2,065 to 3,225 Ω 
      Fig 1: Identifying Crankshaft Position Sensor Connector
      G04018064Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE: In the table above, the terms "cold" and "hot" refer to the temperature of the coils. "Cold" means approximately -10 to 50°C (14 to 122°F). "Hot" means approximately 50 to 100°C (122 to 212°F).

      If the resistance is not as specified, replace the sensor.

scientia non olet · About LEMON Manuals