Fog Lamp Unit: Adjustment

ADJUST FOG LAMP AIMING
1. Tire inflation pressure is the specified value (120 kPa (1.2 kgf/cm² , 17 psi)).
2. Start the engine.
3. Insert the screwdriver tip into the hole in the front bumper and rotate the aiming screw while observing through the front bumper (vertical adjustment).
  HINT:
  
  Rotating the screwdriver clockwise aims the fog lamp axis downward, and rotating counterclockwise aims it upward.
  
  Fig 1: Adjusting Fog Lamp Aiming
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002