Back-Up Lamp Lens: Replacement

HINT:

• See COMPONENTS  .
• The installation procedures are the removal procedures in reverse order.
• Use the same procedures for the RH side and LH side.
• The procedures listed below are for the LH side.
• A bolt without a torque specification is shown in the standard bolt table (see SPECIFIED TORQUE FOR STANDARD BOLTS ).

1. REMOVE BACK-UP LAMP LENS LH 
   1. Disconnect the connector.
   2. Remove the 2 bolts and lens.
      Fig 1: Removing Back-Up Lamp Lens LH

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002