Rear Console Box: Removal

WARNING: This page is about a different car, the 2008 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE CONSOLE BOX HOLE COVER
1. Slide the front seat assemblies RH and LH forward.
2. Slide the console box assembly fully to the back end and remove the console box hole cover.
  
  Fig 1: Identifying Console Box Hole Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE CONSOLE BOX NO. 2 HOLE COVER
HINT:

Use the same procedures for the console box No. 2 hole cover and the console box hole cover.
REMOVE REAR CONSOLE BOX
1. Separate the console box lock control cable assembly from the rear console box.
  
  Fig 2: Identifying Console Box Lock Control Cable Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Keeping the rear console box pulled in the rear direction of the vehicle, remove the 6 bolts from the left and right sides.
  
  Fig 3: Identifying Rear Console Box Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Disconnect each of the clamp and connector.
  
  Fig 4: Identifying Clamp & Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Remove the rear console box.