LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2005 >> RX 330 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 563 (Suspension Control) >> Suspension Control Ecu >> Installation

Suspension Control Ecu: Installation

WARNING: This page is about a different car, the 2007 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL SUSPENSION CONTROL ECU 
    1. Install the suspension control ECU with the 2 bolts onto the bracket.

      Torque: 7.8 N*m (80 kgf*cm, 69 in.*lbf) 

      Fig 1: Identifying Suspension Control ECU Bracket Bolts
      G05269934Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the suspension control ECU connector.
  2. INSTALL AIR CONDITIONER AMPLIFIER ASSEMBLY 
  3. INSTALL ECM 
  4. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY 
  5. INSTALL INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO.2 
  6. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH 
  7. INSTALL FRONT DOOR SCUFF PLATE RH 
scientia non olet · About LEMON Manuals