Fuel Pump Resistor: Installation

WARNING: This page is about a different car, the 2007 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL FUEL PUMP RESISTOR
1. Install the fuel pump resistor with the nut.
  Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf)
  
  Fig 1: Identifying Fuel Pump Resistor & Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the connector to the fuel pump resistor.
INSTALL ENGINE ROOM COVER SIDE (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
PERFORM INITIALIZATION
1. Perform initialization procedure (See INITIALIZATION ).
  HINT:
  
  Some systems need initialization after reconnecting the cable to the negative battery terminal.